BPKDG - C18400, CHROME COPPER ALLOY
- MSDS: BPKDG
- Manufacturer: BRUSH WELLMAN INC
- Product Name: C18400, CHROME COPPER ALLOY
- National Stock Number: 9650-00N032015
Product Identification
Product ID:C18400, CHROME COPPER ALLOY
MSDS Date:12/01/1990
FSC:9650
NIIN:00N032015
MSDS Number: BPKDG
Responsible Party
ELMORE, OH 43416-9502
US
Emergency Phone: 419-862-2745;800-424-9300(CHEMTREC)
Info Phone: 419-862-2745
Preparer: M. KOLANZ & T. N. MARKHAM
Cage: 4B151
Contractor
Telephone: 800-862-4118; -4177 (FAX)
Cage: 4B151
Ingredients
WITH METAL DUSTS AND POWDERS BECAUSE CONTACT LENS
RTECS: 9999999ZZ
CLEANING METHS. CAUTN SHOULD BE TAKEN TO MIN
RTECS: 9999999ZZ
& MANAGED IN ACCORDANCE WITH STATE & LOC
RTECS: 9999999ZZ
SUCH AN ACTIVITY CAN RESULT IN UNNECESSARY
RTECS: 9999999ZZ
SCBA. NIOSH/MSHA APPRVD PRESS-DEMAND AIRLINE
RTECS: 9999999ZZ
CHANGING BAGS IN BAGHOUSE AIR CLEANING DEVICE.
RTECS: 9999999ZZ
CHAMBER CAN BE INSTALLED IF NEC. USE OF AIR CLEANING
RTECS: 9999999ZZ
DIRECT RECYCLING OF CLEANED PROCESS EXHST AIR IS
RTECS: 9999999ZZ
RE-ENTER PLANT THRU MAKEUP/OTHER INLETS.REGULAR
RTECS: 9999999ZZ
OPER PARAMETERS IS RECOM TO ENSURE ADEQ EFFICIENCY
RTECS: 9999999ZZ
IS PREF METH OF CONTROLLING EXPOS TO DUST & FUME.
RTECS: 9999999ZZ
CLOSE TO SOURCE OF CONTAMINATION AS POSS.
RTECS: 9999999ZZ
OVERGARMENTS OR WORK CLTHG SHOULD BE WORN
RTECS: 9999999ZZ
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 0.4-1.2%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0.10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
ARSENIC
CAS: 7440-38-2
RTECS: CG0525000
Fraction By Weight: 0.005%
OSHA PEL 0.5 MG/M3 (AS)
ACGIH TLV: 0.01,A1 MG/M3; 9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CALCIUM OXIDE; (CALCIUM)
CAS: 1305-78-8
RTECS: EW3100000
Fraction By Weight: 0.005%
ACGIH TLV: 2 MG/M3
LITHIUM HYDROXIDE; (LITHIUM)
CAS: 1310-65-2
RTECS: OJ6307070
Fraction By Weight: 0.05%
PHOSPHORUS (WHITE); (PHOSPHOROUS)
CAS: 7723-14-0
RTECS: TH3500000
Fraction By Weight: 0.05%
OSHA PEL 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IRON OXIDE; (IRON)
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 0.15%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
ZINC OXIDE; (ZINC)
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 0.7%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: BALANCE
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
FOR AT LEAST 15 MIN. IF IRRIT PERSISTS OBTAIN MED
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: METAL DUST & FUMES CAN CAUSE
IRRIT TO SKIN, EYES, NOSE, THROAT, LUNGS,& MUCOUS MEMBRANES.
SYMPTOMS MAY INCLUDE COUGH, METALLIC TASTE IN MOUTH, FEVER,
FATIGUE,& NAUSEA. EXCESSIVE INHALATION OF C OPPER CAN CAUSE
RESPIRATORY IRRITATION,COUGH, BRONCHITIS, CHILLS, "METAL FUME
FEVER", DECREASED PULM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: FUNCTION, AND ASTHMA-LIKE SYMPTOMS.
CONTACT WITH COPPER OR CHROMIUM MAY CAUSE ALLERGIC SKIN REACTIONS.
PERIODIC PHYSICAL EXAMINATIONS SHOULD BE USED TO MONITOR POTENTIAL
EFFECTS OF DUST/FUME EXPOSURE.
Medical Cond Aggravated by Exposure:INDIV WHO HAVE HAD ALLERGIC
RXN/SENSITIVITY TO METALS SUCH AS COPPER/CHROMIUM MAY ENCOUNTER
SKIN RASH/DERM IF SKIN CONT W/PROD OCCURS.PERSONS W/IMPAIRED PULM
FUNC, AIRWAY DISEASES/CNDTNS SUCH (SUPDAT)
First Aid
First Aid:INHAL: IMMED REMOVE TO FRSH AIR. IF BRTHG HAS STOPPED,
PERFORM ARTF RESP & OBTAIN MED HELP. INGEST:HAVE PERSON DRINK LRG
QTYS OF H2O & INDUCE VOMIT IF CONSCIOUS. OBTAIN MED HELP. SKIN:
CUTS & ABRASION S CAN BE TREATED BY STD FIRST AID. SKINCONTAM CAN
BE REMOVED BY WASHING W/SOAP & H2O. IF IRRIT PERSISTS OBTAIN MED
HELP. ACCIDENTAL IMPLANTATION BENEATH SKIN REQS REMOVAL. EYES:
FLUSH EYES (SUPDAT)
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:THESE ALLOYS ARE NON-COMBUSTIBLE. USE EXTINGUISHING
MEDIA APPROPRIATE TO SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE WATER TO EXTINGUISH FIRES
AROUND OPERATIONS INVOLVING MOLTEN METAL DUE TO POTENTIAL FOR STEAM
EXPLOSIONS.
Accidental Release
Spill Release Procedures:IF IN POWDER/DUST FORM, YOU MAY NEED TO
ESTABLISH RESTRICTED ENTRY ZONE. PERSONS ENTERING RESTRICTED ZONE
MAY NEED TO WEAR ADEQ RESP PROT & PROT CLTHG. CLEANUP SHOULD BE
CONDUCTED W/VACUUM SYS UTILIZI NG HEPA FILTRATION SYS FOLLOWED BY
WET (ING 12)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:VACUUM/WET CLEANING METHS ARE RECOM FOR DUST
REMOVAL.BE CERTAIN TO DEENERGIZE ELEC SYS AS NEC BEFORE BEGINNING
WET CLEANING. VACUUM CLEANERS W/HEPA FILTERS ARE RECOM TYPE. USE OF
COMPRESSED AIR TO REM OVE DUSTS SHOULD BE AVOIDED AS (ING 14)
Exposure Controls
Respiratory Protection:WHEN EXPOS LIMITS ARE EXCEEDED, APPRVD RESP MUST
BE USED AS SPECIFIED BY AN INDUS HYGIENIST/OTHER QUALIFIED
PROFESSIONAL. EXPOS TO UNKNOWN CONC OF FUMES/DUSTS REQS WEARING OF
NIOHS/MSHA APPRVD PRESS-D EMAND AIRLINE RESP/PRESS-DEMAND (ING 15)
Ventilation:GRINDING/SANDING OPER CONDUCTED UNDER FLOOD OF LIQ COOLANT
MAY REQ LOC EXHST VENT.A FILTER, CENTRIFUGE/SETTLING (ING 17)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD .
Other Protective Equipment:PROT CLTHG SUCH AS FIRE RETARDANT CLTHG, &
MOLTEN SPLASH RESISTANT GARMENTS SHOULD BE WORN AS NEC. PROT (ING
23)
Work Hygienic Practices:HANDS SHOULD BE WASHED BEFORE EATING OR
SMOKING.
Supplemental Safety and Health
MED CNDTNS: AS ASTHMA, EMPHYSEMA, CHRONIC BRONCH, ETC. MAY INCUR
FURTHER IMPAIRMENT IF EXCESSIVE CONC OF DUST/FUME ARE INHALED. IF
PRIOR DMG/DISEASE TO NEUROLOGIC CIRCULATORY, HEMATOLOGIC/ URINARY
SYS HAS OCCURRED, PROPER SCREENING/EXAMINATIONS SHOULD BE
CONDUCTED. FIRST AID PROC: W/COPIOUS AMTS OF CLEAN H2O (ING 10)
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1967F,1075C
Solubility in Water:NONE
Appearance and Odor:SOLID, NO ODOR.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
REACTS WITH SOME ACIDS AND CAUSTIC SOLUTIONS TO PRODUCE HYDROGEN GAS.
HYDROGEN GAS CAN BE AN EXPLOSION HAZARD.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE UNDER NORMAL CONDITIONS OF USE.
Disposal
Waste Disposal Methods:WHEN SPENT, ALLOYS ARE NOT CLASSIFIED AS HAZ
WASTES UNDER FED LAW & ARE NORM RECYCLED. DUST-LIKE MATLS SUCH AS
BAGHOUSE FINES SHOULD BE SEALED IN PLASTIC BAG & PLACED IN SOUND
CNTNR & APPROP IDENTIFIE D.ALL WASTE MATLS SHOULD BE PROPERLY LBLD
(ING 13)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.